By loading the video, you agree to YouTube's privacy policy.
Learn more
indurads iBelt is an off the shelf product which is delivered in two packages: one with the sensors and cables, the other with the compact cabinet.
Installation and commissioning is easy and can usually be done within one shift. This makes the solution easy and cost-effective to deploy.
Unlike other systems, such as belt scales, no recalibration is required.
Unlike other optical systems (such as lasers or lidars), the system works regardless of environmental conditions, such as dense fog, dust, rain or snow.
By loading the video, you agree to YouTube's privacy policy.
Learn more
A 2D radar sensor is mounted above the conveyor and scans a cross section of the passing material.
In combination with a fixed speed value of the passing material, a PLC or drive input signal or – best in combination with our speed radar – a volume measurement is provided.
In addition, height information and material distribution information can be obtained from this measurement.
exact measurement due to full surface coverage
enables safe operation and supports blending functionalities
Based on an indurad Doppler Velocity Radar, the system is able to measure the speed of the material passing underneath.
This is the true material velocity value, which is the exact basis for high precision volume scanning.
The bulk velocity measurement can also be used independently, for example to optimize belt speeds or to detect material slippage.
99% speed accuracy - much better than other measurement systems
no-contact measurement without the need for recalibration
Belt misalignment causes significant damage to the belt and reduces belt life. A belt that does not run well in the rollers consumes more power from the drives. The risk of spillage is increased.
iBelt Misalignment measures the position of the belt at a specific point or along the entire conveyor and is the basis for intervention and optimization.
first step to reduce wear on conveyor belts
reducing energy waste by misalignment
Based on the belt misalignment sensor, the system detects the freeboard on the belt to the left and right of the material.
This information allows control and understanding of the material position on the belt, providing the basis for more efficient control of transfer points and material flow.
see asap if material dispatch on belt is not centered
detect unhealthy material position that increases wear and spillage
This set of specific software algorithms is the result of years of development. The advanced data package provides information on material distribution, center of gravity and height distributions for each instant and for historical data.
This allows for a better understanding of bulk processes and belt usage, while optimizing control. The system uses self-learning algorithms and AI concepts.
learning, understanding and improving mine-wide belt usage
reduce spillage, avoid mistakes in blending processes and predictive maintenance
COUNTRY: Chile
MATERIAL: Primary crushed copper ore
COMPONENTS: 12 x iDRRembedded, 12 x iDVR, OPC server
DESCRIPTION
Existing weight scales need to be replaced due to high maintenance costs. Significant improvements in secondary crushing process due to volume based process control with iBelt.
COUNTRY: Australia
MATERIAL: Iron Ore
COMPONENTS: 2 x iDRR, 1 x iDVR, 2 x iLDR, iRPU-O
DESCRIPTION
Iron ore volumetric measurement.
Belt misalignment measurement and material positon (freeboard).
Improved chute control, full utilization of conveyor belt to shiploader.
COUNTRY: China
MACHINE: IPCC equipment
MATERIAL: Coal
COMPONENTS: iDRR, iDVR, iRPU-I
DESCRIPTION
Belt with high inclination.
Steam coming from the coal.
Moving machinery, permanent vibration of belt, shocks.
COUNTRY: Canada
MATERIAL: Oil Sand / Tar Sand
COMPONENTS: iDRR, iDVR, iRPU-O
DESCRIPTION
Volumetric flow measurement on chain conveyor.
Measuring volume flow and speed to control mixing box.
Extreme weather conditions (snow, temperature).
COUNTRY: USA
MATERIAL: n/a
COMPONENTS: 2 x iDRR, iRPU-O
DESCRIPTION
iBelt mounted on tunneling machine to measure excavated material volume versus calculated quantity of excavated material (to avoid development of caverns).
COUNTRY: Australia
MATERIAL: Coal
COMPONENTS: 2 x iDRR, iRPU
DESCRIPTION
Volumetric measurement with height restriction on chain conveyor.
Explosion proof housings (iCEx/ATEX M2).
No overloading of belt any more due to improved process control.
COUNTRY: Canada
MATERIAL: Potash
COMPONENTS: iDRRembedded, iDVR
DESCRIPTION
iBelt (volume, speed) in potash mines may be bolt into roof.
Measures productivity of mine segment.
COUNTRY: USA
MATERIAL: Hard Coal
COMPONENTS: 2 x iLDR, iRPU-O
DESCRIPTION
Freeboard measurement in underground coal mine.
Allows for maximum utilization of belt.
Center of gravity measurement.
COUNTRY: Chile
MATERIAL: Copper Ore
MACHINE: Tripper Car
COMPONENTS: iDRR, iDVR, iRPU-i
DESCRIPTION
Volume flow on the conveyor belt determines travelling speed of the tripper car, allowing for automation andoptimized material blending.
COUNTRY: USA
MATERIAL: Lime Stone/Coal (combined stock pile)
MACHINE: A-Frame Reclaimer
COMPONENTS: iDRR, iRPU-O
DESCRIPTION
iBelt measures material flow directly after boom, allowing for adapting machine control: long travel speed and boom position improve productivity and to reduce wear.
COUNTRY: Netherlands
MATERIAL: Coal
MACHINE: Reclaimer
COMPONENTS: iDRRembedded
DESCRIPTION
Volume flow measured directly behind reclaimer bucket wheel. Solution provides information to the reclaimer PLC system of the reclaimer, optimizing cutting depths and slew speed.
COUNTRY: Australia
MATERIAL: Iron Ore
MACHINE: Mixing System
COMPONENTS: 4 x iDRR, 4 x iDVR, iRPU-I
DESCRIPTION
Complex mixing process fully controlled by iBelt.
Allows for perfect mixing and thus improves downstream processes.
Significant savings for customer accomplished.
COUNTRY: Australia
MATERIAL: Coal
COMPONENTS: iDRR, iRPU-O
DESCRIPTION
Coal stacker controls volume flow, allows stacking of homogenious piles.
Input for dust reduction in stacking process.
COUNTRY: Australia
MATERIAL: Iron Ore
COMPONENTS: 2 x iLDR, iRPU-O
DESCRIPTION
iLDR contactless freeboard and belt misalignment measurement.
Up to 4000 Hz measurements with mm precision.
COUNTRY: Australia
MATERIAL: Iron Ore
COMPONENTS: iDRR, iDVR, 2 x iLDR, iRPU-O, iCam
DESCRIPTION
iBelt controls surge bin output (optimizing belt load), monitoring belt scale.
COUNTRY: Australia
MATERIAL: Iron Ore
COMPONENTS: iDRRembedded, iDVR, 2 x iLDR
DESCRIPTION
We use Google Language Translator Plugin that uses the free Google automatic machine translation.
Be aware that not all translations have to be correct and that your IP address will be transmitted to Google to receive the translations.
You can always return to our original English version.
